 |  | 
|
|  Bumper ~ HFS™ ~ Shackled w/8274 Winch Plate
Fits FJ40 FJ45 - HFS™ Bumper, made to be stronger than the legendary Warn 8274 Winch
Bumper Features
"Universal Winch Mounting Plate/Bolt Pattern" fits most Warn, Ramsey and Superwinches. Horizontal winches need rotating collars to mount on bumper's vertical winch mount face plate. Measure your winch mount bolt pattern to be 10.0" x 4.5" (254mm x 114.3mm).
Measure the width of your winch - must fit between FJ40 Frame Rails - Click.
HFS Bumper fits perfectly with a Warn 8274 and Saginaw PS Conversion combo.
Winch plate and bumper channel are both 3/8" thick & precision Laser Cut.
Install Hawse or Roller Fairleads, both bolt on perfectly.
Easy Bolt on installation to factory (gusset plates) holes.
This is an ULTRA STRONG 3/8" steel channel trail Bumper! Weight - 58 lbs.
Bumper channel is stronger than vehicle frame
Bumper greatly increases FJ40's approach angle.
Bumper is wide enough for protection but narrow enough for tight trail turns. w - 39 3/4"
Designed for strength, tight trail clearance and clean / good looks.
Powder Coated ~ Silver / Pewter or Black
Break press forming lines may be slightly visible under finish.
2 Shackles (3/4") with Screw-Pins and 1" welded hangers
Designed for strength, tight trail clearance and clean look.
HFS Bumper has two laser cut chain slots on bottom side of channel.
Angular cut chain link slots hold chains up to 3/8" in diameter.
Strong chain slots prevent link slippage.
Chain slots are smartly positioned underneath, not to interfere with winch operation.
No License Plate Holes - Drill to Suit
This is the "Toughest FJ40 Bumper Available"!
Hell-for-Stout Bumper ~ Field Tested by Nolen Grogan ~ w/Saginaw PS System
Note: If selected - System will add cost of Fairlead to base price of Bumper.
| | |  Fairlead, Roller, WarnRollers Reduces Cable Wear, especially on pulls at severe angles.
Measures: 11"W x 5"H x 3/4" Deep (front to back)
WARN Roller Fairlead for Winches over 4,000 lbs
| | |  Bumper Underside - Chain SlotsClick Image to Enlarge
2 ea. Underside Laser Cut Chain Slots
"HFS" 8274 - Feedback - David O'Niell
| | |  New Bumper Bolts ~ A Great Finishing Touch!FJ40 FJ60 FJ62
| |
|
