Weatherstrip, 3M Glue ~ #08011
~ Use 3M Glue (#08011 - Black) for installation of door weather-stripping (w/s). One tube can glue front & rear FJ40 doors. Glue works best above 65 degrees. First, remove old w/s and clean door surface with solvent. When gluing w/s, work in short sections and don't donít stretch w/s. Apply thin layer of glue on both the back of w/s and door. Allow glue to air dry about 1 minute before bonding surfaces together. 3M Glue (#08011) is contact cement and must air dry to make a quick and strong bond. Super Glue ends of w/s together for a clean seam.3M Glue is further discounted when purchased w/CCOT's FJ40 door w/s.
Installation of Weather-stripping ~ Remove old Weather-stripping and clean door surface with solvent. Use 3M Weather-strip adhesive Part #08011 (Black). When gluing Weather-stripping, work/glue short sections at a time. (Donít stretch W/S) Apply THIN layer of glue on BOTH the back side of W/S and door; allow glue to air dry about 1 minute before bonding surfaces together. This is contact cement and must air dry to make quick and strong bond. Super Glue Ends Together for a clean seam ~
NOTE: Adjust Door Striker & Hinges for best w/s fit. ALSO, Rear Passenger's Door Weather-Stripping has 4-Sides and Rear Driver's Door Weather-Stripping has 3-Sides. See Installation Instructions above.
Tip: Adjust Door Striker & Hinges for best weatherstrip fit.
Rear Passenger's Door Weatherstripping has 4-Sides.
Rear Driver's Door Weatherstripping only has 3-Sides.
See Installation Instructions below.