 |
 |
Bumper - HFS™ - Shackled - No Winch Plate
Fits FJ40 FJ45 - HFS Bumper
Install Hawse or Roller Fairleads, both bolt on perfectly.
Easy Bolt on installation to factory (gusset plates)holes.
ULTRA STRONG 3/8" thick steel channel! Weight - 50 lbs.
Bumper channel is stronger than vehicle frame
Bumper greatly increases FJ40's approach angle.
Wide enough for protection - Narrow enough for tight trail turns. w - 39 3/4"
Powder-coated for durability and great looks
Powder Coated ~ Silver / Pewter or Black
Break press forming lines may be slightly visible under finish.
2 Shackles (3/4") with Screw-Pins and 1" welded hangers
Designed for strength, tight trail clearance and clean / good looks.
HFS Bumper has two laser cut chain slots on bottom side of channel.
Angular cut chain link slots hold chains up to 3/8" in diameter.
Chain slots are smartly positioned underneath, not to interfere with winch operation.
No License Plate Holes - Drill to Suit
This is the "Toughest FJ40 Bumper Available"!
Hell-for-Stout Bumper ~ Field Tested by Nolen Grogan ~ w/Saginaw PS System
Click for more "Hell for Stout" Bumper Pics
Note: If selected - System will add cost of winch Channel to base price of Bumper.
Please order Fairlead separately, if needed. |
|
|
 |
HFS™ 8274 - Shackled Bumper - Black
Click to Enlarge Image
Order below |
|
|
 |
Bumper ~ HFS™ ~ Shackled w/8274 Winch Plate
Fits FJ40 FJ45 - HFS™ Bumper, made to be stronger than the legendary Warn 8274 Winch
Bumper Features
"Universal Winch Mounting Plate/Bolt Pattern" fits most Warn, Ramsey and Superwinches. Horizontal winches need rotating collars to mount on bumper's vertical winch mount face plate. Measure your winch mount bolt pattern to be 10.0" x 4.5" (254mm x 114.3mm).
Measure the width of your winch - must fit between FJ40 Frame Rails - Click.
HFS Bumper fits perfectly with a Warn 8274 and Saginaw PS Conversion combo.
Winch plate and bumper channel are both 3/8" thick & precision Laser Cut.
Install Hawse or Roller Fairleads, both bolt on perfectly.
Easy Bolt on installation to factory (gusset plates)holes.
This is an ULTRA STRONG 3/8" steel channel trail Bumper! Weight - 58 lbs.
Bumper channel is stronger than vehicle frame
Bumper greatly increases FJ40's approach angle.
Bumper is wide enough for protection but narrow enough for tight trail turns. w - 39 3/4"
Designed for strength, tight trail clearance and clean / good looks.
Powder Coated ~ Silver / Pewter or Black
Break press forming lines may be slightly visible under finish.
2 Shackles (3/4") with Screw-Pins and 1" welded hangers
Designed for strength, tight trail clearance and clean look.
HFS Bumper has two laser cut chain slots on bottom side of channel.
Angular cut chain link slots hold chains up to 3/8" in diameter.
Strong chain slots prevent link slippage.
Chain slots are smartly positioned underneath, not to interfere with winch operation.
No License Plate Holes - Drill to Suit
This is the "Toughest FJ40 Bumper Available"!
Hell-for-Stout Bumper ~ Field Tested by Nolen Grogan ~ w/Saginaw PS System
Note: If selected - System will add cost of Fairlead to base price of Bumper. |
|
|
 |
Bumper Mounting Tip
FJ40 FJ45
Loosen Bumper Gusset Plates
Align Bumper Bolt Holes with Gusset Plate Holes
Drop in Bolts & Tighten all together |
|
|
 |
"Related Item"
1st Ever - "HFS" Universal Winch Mount Channel for FJ40, Click |
|
|
 |
New Bumper Bolts ~ A Great Finishing Touch!
|
|
|
 |
Fairlead, Hawse, Warn
For winches over 4000 lbs./1814 kgs.
Mounting holes Measure
10" ~ Center to Center. |
|
|
 |
Fairlead, Roller, Warn
Rollers Reduces Cable Wear, especially on pulls at severe angles.
Measures: 11"W x 5"H x 3/4" Deep (front to back)
WARN Roller Fairlead for Winches over 4,000 lbs |
|
|
 |
License Plate Front "T" Bracket w/SST Hardware
CCOT Exclusive License Plate "T" Bracket / Holder
Bracket is designed and located to minimize the presence of plate.
Holder Mounts to factory bolt hole of frame rail.
No drilling required and Stainless Steel (SST) Hardware included.
Click to Enlarge |
Click to Enlarge | |
|
|
 |
License Plate Holder - Front - FJ40 - by CCOT
CCOT Front License Plate Holder
Original Style License Plate Holder
Factory mounting hole pattern
Powder Coated w/Pebble Grain Black Satin Finish
Fits FJ40/45/55 Original or HFS Bumpers |
|
