 |
 Click to Enlarge Photo
|
|
|
 Winch Channel Dimensions & Bolt Pattern
Click Photo to Enlarge
""HFS" Universal Winch Mounting Bolt Pattern" fits almost every winch ~ including Warn, Ramsey and Superwinches. Measure your winch mounting bolt pattern to be 10.0" x 4.5" (254mm x 114.3mm).
|
|
|
 Winch Channel Top ViewClick to Enlarge Photo
Channel allows access to center arm
|
|
|
 Winch Channel Face HeightClick to Enlarge Photo
|
|
|
 Winch Channel (HFS) ~ Roller, CCOTHFS ("Hell For Stout") winch Channel
Fit Stock FJ40 & FJ45s
Fits perfectly between Frame Rails
Mounts to existing factory bolt holes
Ideal for Planetary Geared Winch Mounting
Fits Warn, Ramsey, Super Winch ~ More
Does not fit Warn 8274
Uses Warn (or similar) Roller Fairlead (not included)
Warn Fairlead Measures: 11"W x 5"H x 3/4" Deep
CCOT EXCLUSIVE PRODUCT!
Optional Bolt Kit Includes:4 ea. Super High-Strength Anchore Bolts - ISO Grade 10.9
2 ea. Front Corner Bolts - ISO Grade 8.8
6 ea. All Metal Locknuts
12 Flat Washers
Note: System will add $9.93 to base price for Winch Channel Bolt Kit.
|
|
|
 Fairlead, Roller, WarnRollers Reduces Cable Wear, especially on pulls at severe angles.
Measures: 11"W x 5"H x 3/4" Deep (front to back)
WARN Roller Fairlead for Winches over 4,000 lbs
|
|
|
 Winch Channel (HFS) ~ Hawse, CCOTHFS ("Hell For Stout") winch Channel
Fit Stock FJ40 & FJ45s
Fits perfectly between Frame Rails
Mounts to existing factory bolt holes
Ideal for Planetary Geared Winch Mounting
Fits Warn, Ramsey, Super Winch ~ More
Does not fit Warn 8274
Uses Warm (or similar) Hawse Fairlead (not included)
CCOT EXCLUSIVE PRODUCT!
Optional Bolt Kit Includes:
4 ea. Super High-Strength Anchore Bolts - ISO Grade 10.9
2 ea. Front Corner Bolts - ISO Grade 8.8
6 ea. All Metal Locknuts
12 Flat Washers
Note: System will add $9.93 to base price for Winch Channel Bolt Kit.
|
|
|
 Fairlead, Hawse, WarnFor winches over 4000 lbs./1814 kgs.
Mounting holes Measure
10" ~ Center to Center.
|
|
|
 Winch Channel Bolt Kit - High-Strength4 ea. Super High-Strength Anchore Bolts - ISO Grade 10.9
2 ea. Front Corner Bolts - ISO Grade 8.8
6 ea. All Metal Locknuts
12 Flat Washers
|
|
|
 Hook - Front Bumper - J40 - High-Strength Hook & Bolt KitLand Cruiser Front Recovery Pull Hook.
10,000 lb Recovery Hook.
Bolts to/through front frame rail & gusset like original.
Hook is Black Powder Coat & Steel hardware plated.
Includes 2 ea. super High-Strength bolts ISO 10.9 grade (equivalent to an SAE Grade 8 bolt ) Metric.
Also includes 2 ea. Prevailing Torque Lock Nuts (Non-Reversible) with 4 ea. Flat Washers.
|
|
|
 Winch Chain Bar ~ "Load-N-Go" Winch Chain Bar Page ~ See how it Works
Order Chain Bar with or without Pull Shackles
Chain Bar, slots and holes are precision laser cut
Bar features Strong 3/8" angle iron
2" hitch box receiver
3/4" Heavy Duty Shackles ~ Rated @ 4-3/4 Tons
Versatile shackles allow for pulls made with chain, strap or rope.
Vertical slots allow bar to be used with pull chain only
Shackle holes allow for clevis chain hooks to be added to either bar.
Beautifully gray "Hammered Steel" Powder Coating Finish
System will add $20 to base price for Shackled Chain Bar.
Chain Bar slides on male receiver of most portable which channels.
|
|
|
 Bumper - HFS™ - Shackled - No Winch Plate
Fits FJ40 FJ45 - HFS Bumper
Install Hawse or Roller Fairleads, both bolt on perfectly.
Easy Bolt on installation to factory (gusset plates)holes.
ULTRA STRONG 3/8" thick steel channel! Weight - 50 lbs.
Bumper channel is stronger than vehicle frame
Bumper greatly increases FJ40's approach angle.
Wide enough for protection - Narrow enough for tight trail turns. w - 39 3/4"
Powder-coated for durability and great looks
Powder Coated ~ Silver / Pewter or Black
Break press forming lines may be slightly visible under finish.
2 Shackles (3/4") with Screw-Pins and 1" welded hangers
Designed for strength, tight trail clearance and clean / good looks.
HFS Bumper has two laser cut chain slots on bottom side of channel.
Angular cut chain link slots hold chains up to 3/8" in diameter.
Chain slots are smartly positioned underneath, not to interfere with winch operation.
No License Plate Holes - Drill to Suit
This is the "Toughest FJ40 Bumper Available"!
Hell-for-Stout Bumper ~ Field Tested by Nolen Grogan ~ w/Saginaw PS System
Click for more "Hell for Stout" Bumper Pics
Note: If selected - System will add cost of winch Channel to base price of Bumper.
Please order Fairlead separately, if needed.
|
|
|
 Shackle, Screw-Pin, Big 3/4", 1 ea.Allows for many creative recoveries.
Ideal for use with Straps & Chains
A MUST for every Gear Bag
Heavy Duty - 3/4" ~ Rated 4-3/4 Tons
Drop forged hot dipped galvanized Shackle.
Installed on all "Hell for Stout" Bumpers
|
|
